JKT03H-F00Y80H Mining Intrinsic Safety Magnetic Sensor Product Description: 1. The magnetic proximity switch is composed of two parts: a magnet and a switch contact. Magnets are divided into two types: electromagnets and permanent magnets, and can be selected according to the needs of control. The switch contacts are divided into three forms: normally open contact, normally closed contact, and transfer control contact, which are also selected according to actual needs. The magnet and contact should be installed on the same axis, and the distance between the two should be within the working distance. There should be no strong magnetic field around the switch contacts to avoid any impact. Electromagnets require direct current 24V power supply, and the two leads of the switch contacts should be connected in series to the power supply and load, and should not only be connected to the power supply, causing short circuiting and burning of the contacts. The wiring should be as short as possible and as far away from the wiring as possible. 2. Functional non memory magnetic proximity switches should be non-contact and have on/off or switching functions to achieve alignment, limiting, and various control purposes. The main purpose and characteristics of this series of magnetic proximity switches are intrinsically safe structures, with an IP54 rating. Adopting the principle of magnetic induction, it is resistant to collisions and has strong capabilities. Mainly used to detect the position of moving objects, when the magnetic steel on the moving object passes by, the proximity switch contacts act. The memory type proximity switch has a memory function when it opens and closes when it returns. Widely applicable to coal mines, chemical industries, and petroleum hazardous areas, it is a sensor in automatic control systems& Technical parameters of JKT03H-F00Y80H intrinsically safe magnetic sensor for mining: 1. Working voltage: C, AC 0-245V2, output current: 4A3, reliable action frequency: not less than 106 times. 4. Contact mode: normally open, normally closed. 5. Relative movement speed between magnetic steel: 15m/s6, reliable action distance: 200mm Maintenance: 1. The proximity switch should be regularly inspected according to the requirements of coal mine regulations during use. If any problems are found, they should be repaired or replaced in a timely manner. When repairing or replacing, the power should be cut off. 2. Generally, an inspection should be conducted every six months. 3. When the proximity switch is used again after being idle, it must be opened and debugged on the ground before it can be installed and used in the well. Hunan Chenzhou KT03H-F00Y80H Magnetic Proximity Switch with Strong Capability Shandong Zhuoxin Product Warranty Period: Zhuoxin's various products are guaranteed for 1 year, packaging, welcome to purchase! The online quotation is inaccurate, the technical parameters of the published product information are not detailed, and the product images corresponding to the model may not be correct. The product model shall prevail. For all products, please consult us and the actual quotation shall prevail. Chute blockage SMG-A-2
Proximity switch IME18-12NPSZW2S
Proximity switch IGT205
Proximity switch NBN4 12GM40
Magnetic proximity switch KSC02-0.1/220
Magnetic proximity switch CST-220
Magnetic proximity switch E-8-ZS-KL
Magnetic proximity switch L108-6/LAJ-8F Working voltage ACC110V-220V Rated current 0.
Magnetic proximity switch KSC1010G-4-22 with memory; Peripheral equipment
Magnetic switch KY35M-2
Electrical components of proximity switch E2E-X10MY1-Z
Slipping switch H-II
Limit switch BYW20-11
NKPK - Type I NKPK - Type I two-stage deviation switch 2 open and 2 closed
Liquid level switch PRL-100
Deviation switch vertical rod PXA-02GKH-10-30-A
Position control switch LX4-31
Deviation switch vertical roller JSB/HKPP12-30
Proximity switch E2E-X18MY1-Z