Three wire proximity switch BF1-9003430 wiring instructions
This product is from Shandong Zhuoxin Company's PIFA, with a one-year warranty and packaging. Welcome to purchase. The wiring instructions are as follows: 1) There is a difference between two wire and three wire proximity switches. Three wire proximity switches are further divided into NPN and PNP types, and their wiring is different. 2) The wiring of the two wire proximity switch is relatively simple. The proximity switch is connected in series with the load and then connected to the power supply. 3) Wiring of the three wire proximity switch: connect the red (brown) wire to the positive end of the power supply; Connect the blue wire to the 0V end of the power supply; The yellow (black) line represents the signal and should be connected to the load. The other end of the load is connected as follows: for NPN type proximity switches, they should be connected to the positive end of the power supply; For PNP type proximity switches, they should be connected to the 0V end of the power supply. 4) The load of proximity switches can be signal lights, relay coils, or digital input modules of programmable logic controllers (PLCs). 5) Special attention should be paid to the type selection of the three wire proximity switch connected to the PLC digital input module. PLC digital input modules can generally be divided into two types: one type has a common input terminal that is the negative pole of the power supply, and the current flows out from the input module. In this case, NPN type proximity switches must be selected; Another type of common input terminal is the positive pole of the power supply, and the current flows into the input module. At this time, it is necessary to choose a PNP type proximity switch. Don't make the wrong choice. 6) The two wire proximity switch is limited by working conditions, and when conducting, the switch itself generates a certain voltage drop. When cutting off, there is also a certain amount of residual current flowing through. Therefore, consideration should be given when selecting it. Although the three wire proximity switch has an additional wire, it is not affected by adverse factors such as residual current and works more reliably. 7) Some manufacturers will approach the switch's&quo; Normally open; And&quo; Normally Closed; If the signal is simultaneously led out or other functions are added, please wire according to the product manual. Some product models of Zhuoxin Company: Rope switch HQL-1085/304A
Float level controller ST-M15-2
Xuchang KS211M C10-30V magnetic switch
Proximity switch Bi4-M12-AN6X-H1141
Proximity switch LJ18A3-8-Z/EX/DC24V (normally open) Two wire
Proximity switch TL-Q5MC1
Magnetic control travel switch WKC-A508-LED
Shandong magnetic switch AL-20R
Magnetic switch KSZ-1M180Y
Travel switch FJK-TL series G6Z1-TL-LED-HGST
Pneumatic valve position feedback device LIMITED SWITCH BOX ALS200M
Proximity switch Ni4-M12-RP6X GB/T14048.10
Magnetic switch BIM-IKT-AD4X
Magnetic switch KSZ-1M180Y
Travel switch FJK-TLSeries G6Z1-TL-LED-HGST
Travel switch WLCA12-2N
Magnetic switch CMSG-020
Magnetic switch CS1-F-U
Magnetic switch DZ73
Position control switch SZ-8104
Position control switch LJK18-3420KH
Magnetic switch KO 220VAC/
Magnetic switch W1-K01-P & nbsp;