GUC100 mining explosion-proof proximity sensor, also known as reed switch, is a passive switching element with contacts. It uses magnetic field control, with magnetic connection but no magnetic interruption, to control circuit operation or detect mechanical motion status using this controlled switching characteristic& nbsp; Shandong Zhuoxin Machinery Co., Ltd. GUC100 Mining Explosion proof Proximity Sensor Main Performance a) Sensor Contact Capacity: C15V/0; b) Proximity sensor resistance value: Connect resistance≤ 1Ω， Disconnect resistor≥ 100MΩ； c) Action distance: 0-100mm Action performance: When the magnetic steel moves to the sensor's action range, the internal switch is turned on, and when it returns outside the action range, the internal switch is turned off. Install& nbsp;   Used in conjunction with bend turnout warning devices and crossing signal control devices in the intrinsic safety circuit of the locomotive, installed at the turnout of the locomotive running underground in coal mines. The locomotive movement: distance from the sensor≤ 100mm, sensor output closed, distance sensor> 100mm, sensor output disconnected. Zhuoxin Company's main products include two-stage deviation switch, bidirectional rope switch, belt slip switch, stainless steel tilt switch, anti rotation material level switch, longitudinal tear detection device, chute blockage, underspeed switch, photoelectric sensor, magnetic sensor, mining sensor, sound and light warning device, etc. nine hundred