KGE1-1AP-SK parking magnetic induction switch (parking switch)
Magnetic induction switch (parking switch) is a domestically produced product. Due to the use of magnetic induction principle, it fundamentally solves the impact caused by any electric field interference. This series of switches has a long operating distance, strong performance, good sealing performance, stable and reliable magnetic force, hemispherical working characteristics, easy installation, long service life, and can work in high temperatures, temperatures, and harsh environments. They are widely used as position control switches in steel rolling, coking, shipbuilding, mining, lifting, transportation, and other fields, or replace the original slide contactor mechanical limit switches. They are domestically produced products and components that achieve contactless transmission of control signals. The main features of KGE1-1AP-SK parking magnetic induction switch (parking switch) products are: 1. Long operating distance: a. Electromagnet * Large operating distance 120mm; b. Permanent magnet with a large operating distance of 150mm. 2. Strong load capacity: CJK-1Z/T can directly carry 3A (value) load; And add intermediate relay transition Can  Reliable and convenient. 3. Sensitivity, reaction speed:; The response time is less than 2.5ms. 4. Can work in extremely harsh environments: adaptable to a wide temperature range of -50 ℃; Mash;& Mash;+120 ℃ b. There is a strong:. c. Waterproof and dustproof. 5. Reliable: As long as there is no strong magnetic field near the switch and the product; The technical manual requires installation to ensure that there is no false operation of the switch 500000 times, with a reliability of 100. 6. The working characteristics of magnetic proximity switches: they are non-contact switches that rely on magnetic induction to operate, fundamentally; Solved the problem of misoperation caused by contact. 7. Wide application range: mainly used in coke oven equipment, dump truck equipment; Steel equipment. Magnetic induction switch (parking switch) product description: 1. The magnetic proximity switch is composed of two parts: a magnet and a switch contact. Magnets are divided into two types: electromagnets and permanent magnets, and can be selected according to the needs of control. The switch contacts are divided into three forms: normally open contact, normally closed contact, and transfer control contact, which are also selected according to actual needs. The magnet and contact should be installed on the same axis, and the distance between the two should be within the working distance. There should be no strong magnetic field around the switch contacts to avoid any impact. Electromagnets require direct current 24V power supply, and the two leads of the switch contacts should be connected in series to the power supply and load, and should not only be connected to the power supply, causing short circuiting and burning of the contacts. The wiring should be as short as possible and as far away from the wiring as possible. 2. Functional non memory magnetic proximity switches should be non-contact and have on/off or switching functions to achieve alignment, limiting, and various control purposes. Description of alignment and control configuration: Based on the detection and control points of each user on site, configure the number of contacts and magnets for the magnetic proximity switch. Installation requirements: Magnetic induction switch (parking switch) can be installed indoors and outdoors, suitable for ambient temperature of -55 ℃
~125 ℃
; Contact 1. Large action distance: 120mm2 On/off difference: within 30mm Response time: less than 10ms4 Vibration frequency: 20G 10-1000HZ5 Excitation voltage: C24V; Plun; 2V6. Excitation current: 0.6A7 Environmental humidity: -55 ℃; mash;+125℃