BC-110 Marine Waterproof Sound and Light Alarm High decibel Alarm
The BC-110 Sound and Light Alarm is equipped with high-power speakers, mainly used as safety alarm devices for large equipment such as lifting machinery, gantry cranes, bridge cranes, and cranes. It can also be made into voice content according to customer requirements for safety warnings in special environments such as port code heads, mines, metallurgy, and large workshops. The BC-110 Marine Waterproof Sound and Light Alarm High decibel Alarm is applied in the field of engineering machinery (cranes, crawler cranes, tire cranes, etc.), port machinery (gantry cranes, bridge cranes, etc.), and material transmission equipment such as belt conveyors. Main functions and features• The shell is made of aluminum alloy casting, with a beautiful structure, corrosion resistance, good sealing performance, and excellent waterproof and dustproof functions& bull; Integrated chip design with *'s anti electromagnetic interference performance& bull; The lampshade is made of polycarbonate material, which has good light transmittance, UV resistance, aging resistance, and high-strength impact resistance& bull; The reflection mirror treated with vacuum coating improves the diffusion effect of signal light& bull; Multiple tones to choose from, with adjustable volume and a wide range of applications& bull; The speaker has high power and can adapt to noisy environments. Main technical parameters Working voltage AC24V/AC36V/AC48V/AC110V/AC220V AC380V/DC24V (special voltage can be customized) Power frequency 50Hz~60Hz Tone electric ringtone, A, B, E, D, voice (optional) Power 25W/50W Color red, yellow, green (optional) Sound level 110dB Warning sound and light working temperature -30 ° C~+70 ° C Protection level IP65 Working humidity 10%~95% (non condensing) Material aluminum alloy Reference weight≤ 6.8kg installation and usage method• Check if the rated working voltage of the power supply used matches that of the sound, light, and electronic buzzer& bull; The alarm should be fixed to the mounting surface with four M8 screws, which should be flat and have sufficient mechanical strength& bull; Unscrew the two screws on the nameplate cover plate, remove the cover plate, and expose the wiring terminal block. ? • Connect the power and control wires from the waterproof joint and correctly connect them according to the terminal definitions on the label& bull; Only after checking the correct connections of the power cord and other control cables can the power be turned on.